Important!
This tool is simply an aid for calculating how to split a water bill into individual bills for each submeter. Flows.com assumes no responsibility for the improper implementation of it. It is the sole responsibility of property owner to abide by all governing laws and correctly calculate any bills.

Enter the numbers in the fields below:

Step 1:
Enter the main meter information in gold fields in the top row.
Units of Water Used and Dollar Amount billed.

Step 2:
Enter all of the submeter Units of Water Used.
Be sure that they are all the same Units of Measure!

Step 3:
Select the method of calculation. ( HELP? )

Meter Units of
Water Used		 Method of Calculation Dollar Amount

% of MAIN
% of All Submeters
MAIN     $
1 $
2 $
3 $
4 $
5 $
6 $
7 $
8 $
9 $
10 $
11 $
12 $
TOTAL
(of Submeters)		 100%
(Always)		 $
Difference =%   Difference $
Notes:
Please enter the required information above.

Tips:

1) If you are certain that ALL water which passes through the MAIN meter also goes through a Submeter, you should use the "Percentage of All Submeters" method to calculate your bills.

2) If you are certain that ALL water which passes through the MAIN meter also goes through a Submeter and the Difference is larger than normal (about 3%), there is a good chance that there is an issue with one or more water meter. You should investigate what might be causing this.

3) Make sure that ALL METERS use the same units of measure! If they do not, you will have to convert the mismatched meters to the most common unit of measure used.